Kj Single Line Grease Distributors

• After-sales Service: 1 Year
• Warranty: 1 Year
• Flow Rate: Variable Pump
• Type: Oil Pump
• Drive: Electric
• Performance: High Pressure
• Model NO.: KJ
• Transport Package: Plywood
• Specification: 3kg
• Trademark: dajing
• Origin: China
• HS Code: 8413502090

Product Description

KJ  

single line distributor is produced in carbon alloy structural steel.
oil outlet of  intermediate all fitted with heck valve to prevent Lubricants back flow
 
Applicable to single line centralised lubrication system of 20 Mpa nominal pressure ,Intensive lubrication points, high oil frequency,different oil consumption system.

 

model	KJ
piston	5T	5S	10T	10S	15T	15S
oil or grease each outlet ml/circle	0.082	0.164	0.164	0.328	0.246	0.492
oil or grease out number	2	1	2	1	2	1
the highest pressure	14Mpa(lubricant is grease) 7Mpa( lubricant is oil)

 
Lubricants: grease with penetrometer of no less than 265(25°C,150g) 1/10mm and lubricant oils with viscosity of greater than N120.
Temperature: from -10°C to 80°C.

single-line progressive distributors of models KJ,KM and KL.They have been broadened in application greatly.They consist of distributor pieces made of mid-caibon alloy structural steel,end ones and 3-8 mid ones in segments.The mid pieces' outputs and outlet number depend on application requirments.Normally,outlets are located on both sides of the distributors and alternate outlets are arranger on the top.Outlet ports of the mid blocks are equipped with built-in check valves,which can avoid lubricant back-flow due to back pressure of lubrication points and ensure a correct output of each outlet.
These distributors are designed for use in single-line centralized lubrication systems with dense lubrication points and various outputs and frequent feedings.Particularly take care that the maximum operating pressure of 20Mpa is not exceeded.They are merged to form two-grade distributors,performing partition lubrication cont